ā06-23-2025 12:58 AM
I have setup up a number of FTDS that are managed by FMC in CML labs. I have setup the in-built desktop in CML that is hanging off a FTD. I am able to get the internet via FTD-->Router (NAT)-->External Connector and I am able to get internet access from the virtual Desktop.
I want to test some URL filtering, the FTD has the essential license with URL filtering. However, when testing the interactive block, it is not working. I added the default Social Networking category in the URL filtering, however, I am still able to get to social media and no interactive block working.
Is the URL filtering a feature of the FMCv built into CML? I cannot see any issue with my ACP and routing is working.
ā06-23-2025 01:25 AM
Try clear dns db in PC abd check again
MHM
ā06-23-2025 10:53 PM
No luck
ā06-24-2025 01:23 AM
if you have time for this long way troubleshooting confirm to start see why URL is not work
I will send some detail After your confirm
MHM
ā06-24-2025 02:24 AM
ā06-24-2025 02:40 AM
Let start with license
From fmc check
System > Licenses > Smart Licenses
See if url license is add or not
MHM
ā06-27-2025 05:36 PM
As you can see, all in compliance
ā06-29-2025 04:40 AM
Good
Now are traffic http or https ?
If it https then ftd need to ssl decrypt traffic before it can filter url' url is exchange with GET messages of http/s
Check that
MHM
ā07-02-2025 03:34 AM
The issue could be related to DNS on the FMC or a download failure. Please go through this link and see if it helps:
Troubleshoot Cloud Lookup Errors and URL Filtering Issues - Cisco
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide