Using SCP on an ASA5510

[charles.e.davis]

We have to use scp on all of our network devices.  It worked quite well on our routers and switches but I can't seem to get it to work for the firewalls and IPS.  I enabled scp on my ASA5510 using the command "ssh scopy enable".  I also ensured that a rsa key was generated and that ssh ver 2 was enabled.  But I can't seem to locate the commands to actually have my firewall either copy it's configuration to a server or reach out to a server to pull down a file.  We are using IOS 8.2(1).  Thanks for the help

Charles

[Jennifer Halim · Accepted solution]

Unfortunately it's an SCP server only support on ASA, so you can only terminates the SCP connection on the ASA, not initiate an SCP connection from the ASA.

Here is more information on SCP for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/s8.html#wp1510629