Verifying Compatibility of VS-S2T-10G (Sup2T) with IDSM-2 (IDSM2)

[kbyrd]

I am preparing to do an upgrade from Sup720 to Sup2T on a Catalyst 6509E.

I am not seeing compatibility of the Sup2T with the IDSM2 in the release notes.

Could someone verify if the IDSM2 is compatibility with the Sup2T (running s2t54-ipservicesk9-mz.SPA.150-1.SY3.bin)

If not, is there a follow-on product?

[Marco Attene]

Hi Kbyrd,

the IDSM2 seems to be incompatible with the SUP2T.

Software and Hardware Requirements

The following are the IDSM-2 software and hardware requirements:

•Catalyst software release 7.5(1) or later with Supervisor Engine 1A with MSFC2

•Catalyst software release 7.5(1) or later with Supervisor Engine 2 with MSFC2 or PFC2

•Cisco IOS software release 12.2(14)SY with Supervisor Engine 2 with MSFC2

•Cisco IOS software release 12.1(19)E or later with Supervisor Engine 2 with MSFC2

•Cisco IOS software release 12.1(19)E1 or later with Supervisor Engine 1A with MSFC2

•Cisco IOS software release 12.2(14)SX1 with Supervisor Engine 720

•Cisco IDS software release 4.0 or later

Tried to configure the products within 6509 chassis, but that confirms the above info

I will check if any similar module will be available soon.

Regards,

Marco