11-06-2014 02:28 AM - edited 03-12-2019 05:35 AM
Hi,
I have installed Sourcefire_3D_Device_Virtual64_VMware-5.3.0-571 on vmware ESXi 5.0, installation was ok, I can ping and access via ssh Sourcefire_3D but I am not able to access it via Internet Explorer or Firefox.
I see with wireshark that Sourcefire_3D receive packet from browser client but does not complete 3-way handshake.
I am using my laptop with Windows 7 64bit, with vmware workstation v. 10.0.4 and ESXi 5.0.0.
regards
Antonio
Solved! Go to Solution.
12-21-2014 11:35 AM
Virtual 3D Sensors do not have a web interface like their physical counterparts. You'll only be able to configure the manager and all else from CLI;
config manager add <dc IP> <psk>
ex; config manager add 10.1.2.3 ThisIsMyP5K!
Once you've done that, and configured the device as a managed device in the DC, you should be good to go.
12-21-2014 11:35 AM
Virtual 3D Sensors do not have a web interface like their physical counterparts. You'll only be able to configure the manager and all else from CLI;
config manager add <dc IP> <psk>
ex; config manager add 10.1.2.3 ThisIsMyP5K!
Once you've done that, and configured the device as a managed device in the DC, you should be good to go.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide