12-20-2018 04:33 AM - edited 03-12-2019 07:11 AM
Hello,
I have a question regarding FPR inline set configuration.
We use FPR2130 with FTD as an IDS sensor (passive + SPAN) at this moment.
We want to configure in-line set for another type of traffic. So, in my opinion, we have to connect another physical interface.
And this is the question - can we use VLANs in the inline set? I mean 1 physical interface and 2 VLANs (in/out).
Thank you in advance.
SP.
Solved! Go to Solution.
12-20-2018 11:49 PM - edited 12-27-2018 01:10 AM
Hi,
Inline set is a pair of interfaces, it should be two interfaces. One will be for IN traffic and other will be for OUT traffic.
You cannot create vlan for IN/OUT traffic for the inline set.
Thanks,
Abheesh
PS: Please don't forget to rate and select as validated answer if this answered your question
12-20-2018 11:49 PM - edited 12-27-2018 01:10 AM
Hi,
Inline set is a pair of interfaces, it should be two interfaces. One will be for IN traffic and other will be for OUT traffic.
You cannot create vlan for IN/OUT traffic for the inline set.
Thanks,
Abheesh
PS: Please don't forget to rate and select as validated answer if this answered your question
01-10-2019 12:15 AM
Hi Abheesh,
thanks for your reply ;)
SP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide