VPN client connects to ASA but cannot access internal network!

[eadames]

Hi, any help will be appreciated.

I just got a Cisco ASA 5505 and configured for VPN. I can connect from a remote location using the VPN client, but cannot route any packets! Also my local access to the internet gets disconnected. What do I need to fix this? split-tunnel config?

Current config is attached.

thanks

[acomiskey · Accepted solution]

Add this for your first issue...

crypto isakmp nat-traversal

Then you can configure split tunneling for local internet access.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

[eadames]

Thanks, you were right on the mark!

Added the crypto isakmp nat-traversal command and configured split tunneling, is working fine now, thanks a lot for your help.