01-11-2006 04:30 AM - edited 02-21-2020 12:38 AM
Hi, I VPN to outside don't work. Please help.
Solved! Go to Solution.
01-12-2006 05:53 AM
just wondering what version is running on the pix. the command introduced at v6.3.
unfortunately, there is no workaround except the os upgrade.
01-11-2006 05:15 AM
just wondering if you are referring to lan-lan vpn or remote vpn access from inside to outside.
also please advise what sort of vpn we are discussing here. whether ipsec or pptp or gre etc.
01-11-2006 05:16 AM
just wondering if you are referring to lan-lan vpn or remote vpn access from inside to outside.
also please advise what sort of vpn we are discussing here. whether ipsec or pptp or gre etc.
01-11-2006 05:27 AM
Hi, remote VPN to outside PPTP. Thanks.
01-12-2006 02:31 AM
apply the command "fixup protocol pptp 1723" on the pix.
01-12-2006 05:41 AM
Hi, command not found.
01-12-2006 05:53 AM
just wondering what version is running on the pix. the command introduced at v6.3.
unfortunately, there is no workaround except the os upgrade.
01-13-2006 05:11 AM
If you are sitting behind a firewall, ensure correct ports are enabled to allow outbound access to the remote location. Typically the ports will be UDP 4500, 10000, 50-51, and 500.
This assumes a cisco vpn client using ipsec.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide