VPN Remote Access client can also access Lan-to-Lan tunnels?

[ajlessard]

Hi...

I have a VPN 3005 concentrator that seems to work fine, that supports both incoming VPN remote access clients (using the Cisco client), as well as LAN-to-LAN tunnels elsewhere. Both seem to work fine, but I have a need to have some RA clients come in on an IPSec tunnel, then be able to utilize the LAN-2-LAN tunnels as well. Everything seems set up correctly, including the destination LAN (across the tunnel) being in the address list, etc., but I can't get the client to be able to access the LAN across the L2L tunnel.

Anything I should be looking for?

Thanks..

Arthur

[pkinzel]

What is the device on the other end of the 3005 Lan-to-Lan, another 3005? Pix?

Does the remote LAN have the proper routing and security to get back to the RA client?