Hi...
I have a VPN 3005 concentrator that seems to work fine, that supports both incoming VPN remote access clients (using the Cisco client), as well as LAN-to-LAN tunnels elsewhere. Both seem to work fine, but I have a need to have some RA clients come in on an IPSec tunnel, then be able to utilize the LAN-2-LAN tunnels as well. Everything seems set up correctly, including the destination LAN (across the tunnel) being in the address list, etc., but I can't get the client to be able to access the LAN across the L2L tunnel.
Anything I should be looking for?
Thanks..
Arthur