vpn solution

[any_line]

environment £º

center£ºrouter2651(Async/Sync Serial WAN Interface Card)

question:

when mobile workers with vpn software connect center router2651 , how do we configure router2651,and do we need a hardware ,example£ºaccess server.

thanks for all

[m.singer]

The configuration example can be found in the following document. The example given is for VPN client on Windows platform and the Router used is 2611. You could use the same configuration for a 2651 also.

http://www.cisco.com/warp/public/707/ipsec_radius_config.html

With an access server you can go in for a VPDN configuration instead.