Network Security

I have read in some Ciscoworks documents that there is a "server" install and a "client" install of the component? I can't find any further info about what the client piece is all about? If Ciscoworks is managed through a web browser, what are they r...

Hello... I would like to get feedback from anyone who has deployed multiple Ciscoworks servers through out the enterprise. In particular would like to find anyone with success / failure experiences using centralized RME server scheme. (using one cent...

Hi, I have a cisco 515 pix on my network and the other day it reboot itself and I got this message.Thread Name: (Old pc 0x80205adf ebp 0x818bdf7c)Traceback:0: 44cd7242 vector 0x0000000e (page fault) edi 0x00000000 esi 0x80791db0 ebp 0x808ab304 esp 0x...

Here´s the problem: I have 6.3.1 version running and have had this problem: Without any change, pix stop sending traffic trough their inside and outside, it does not block, CPU remains under 50%, While in this status, I can access pix, check ports, t...

Hi!I am about to setup a couple of branch office sites connected to the corporate network thru Easy VPN Remote Access. I will be using a PIX501 at the VPN client side and a VPN3030 Concentrator at server side.My question is, can I use our Cisco Secur...

I am using a PIX 515. I only have 1 public IP address from my ISP that is the outside ip address of the PIX. We are installing a mail server on the inside of the PIX. I want all port 25 traffic that comes to the PIX outside IP address to go to the Ex...

I'm trying to renew my cert on my pix with a MS Cert Server.Te Cert Expired today and all my client connections are failing.I've tried to renew the cert using the following:no ca save allca zeroize rsano ca ident myidentca generate rsa key 1024ca ide...

Folks, We want to implement network level security within our Lan environment. I have been looking at different technologies Cisco has to offer. here are my thoughts. What i am looking for is security at the network level, that means when a user with...

Hello, I was wondering if someone could help me out. We have a Cisco PIX 515, right now it is just being used with the two standard interfaces that come with the unit. We want to create a DMZ and have checked our license and can add a third card. Is ...

Hi All,I have a interesting problem that I can not figure out. I have a Pix 520 running 6.2.2 and I have a DMZ zone. In this zone I have a Web Server. People can get to the web server pages fine. I can not do a nslookup, a windows update or an anti v...

I've been looking around, and I can't seem to findany reference to timed access-list on a PIX. Is therea way to do them, and if so how.

Hi,I am trying to setup a PIX (v6.3.3) to allow an internal host (Windows Server 2003 DC) to get its time from an NTP server on the Internet. Sorry for all the questions...1) I am confused because I thought the PIX allowed any connection originating ...

I don't see much discussion and or documentation regarding ospf on PIX..Am just wondering how pix behave when it is configured for ospf network. Are LSAs propagated in the same fashion as routers do? I mean, are the routes learned say from the outsid...

I want to upgrade my PIX 525 FO UR bundeled version 6.1 (2) to 6.3(3).1. What precautions I need to take 2. How do I backup my 3des activation keys3. Do I need to upgrade both the firewalls together or I can upgrade one and the second later. (present...

Is it possible to make a VPN tunnel from a client over the internet to a Cisco826 router? This router has IP/FW/IPSEC 3DES software. Does anyone have a configuration example?Thanks a lot.Eduard van Dijk