I'm replacing a PIX 501 with a new ASA. The 501 already has the VPN details and all works but when i try to replicate with the ASDM i'm having no joy. I'm having trouble configuring my Cisco ASA to do a site to site VPN to our Cisco PIX. Could someone suggest the ASA commands i should enter. Here is the current PIX 501 vpn information:
access-list outside_cryptomap_19 permit ip 192.168.40.0 255.255.255.0 192.168.200.0 255.255.255.0
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto map outside_map_1 19 ipsec-isakmp
crypto map outside_map_1 19 match address outside_cryptomap_19
crypto map outside_map_1 19 set peer 62.244.186.18
crypto map outside_map_1 19 set transform-set ESP-DES-MD5
crypto map outside_map_1 20 ipsec-isakmp
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
What would be the equivelent for the ASA?
Any help is appreciated.
Thanks,
Tarran
