We are hosting a web page and it can be viewed internally by it's private IP (192.168.42.4). It can be viewed externally when using our public IP address. However it cannot be loaded internally by using the external IP. It asks to log in (to the router) when trying to load the page. Please advise. Router configuration will follow. i use cisco router 881
interface Loopback1
no ip address
!
!
interface Tunnel0
ip address xx.xx.xxx.16 255.255.255.0
no ip redirects
ip mtu 1338
ip nhrp authentication Kxxxxx
ip nhrp map xx.xx.xxx.1 xx.xx.xxx.80
ip nhrp map multicast xx.xx.xxx80
ip nhrp network-id 100000
ip nhrp holdtime 600
ip nhrp nhs xx.xx.xxx.1
ip summary-address eigrp 1 xx.xx.xxx.0 255.255.255.0
tunnel source FastEthernet4
tunnel mode gre multipoint
tunnel key 100000
tunnel protection ipsec profile vpnprof
!
!
interface FastEthernet0
!
!
interface FastEthernet1
switchport access vlan 2
!
!
interface FastEthernet2
switchport access vlan 3
!
!
interface FastEthernet3
switchport access vlan 43
shutdown
!
!
interface FastEthernet4
ip address xx.xx.xxx.242 255.255.255.248
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
service-policy output QOS-CBWFQ
!
interface Vlan1
description xxxx
ip address xx.xx.xxx.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
!
interface Vlan2
description "VDO CONFERENCE"
ip address xx.xx.xxx.254 255.255.255.0
!
!
interface Vlan3
description "Hit "
ip address xx.xx.xxx.254 255.255.255.0
!
!
interface Vlan43
ip address xx.xx.xxx.254 255.255.255.0
ip nat inside
ip virtual-reassembly
!
!
!
router eigrp 1
distribute-list 10 out Tunnel0
distribute-list 20 in Tunnel0
network 10.0.0.0
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
ip nat inside source list 30 interface FastEthernet4 overload
ip nat inside source list nat interface Loopback1 overload
ip nat inside source static tcp xx.xx.xxx.4 80 xx.xx.xxx 80 extendable
ip nat inside source static tcp xx.xx.xxx.4 443 xx.xx.xxx 443 extendable
ip nat inside source static udp xx.xx.xxx.4 1194 xx.xx.xxx 1194 extendable
ip nat inside source static tcp xx.xx.xxx.4 8906 xx.xx.xxx 8906 extendable
ip route 0.0.0.0 0.0.0.0 xx.xx.xxx.241
ip route 10.1.23.0 255.255.255.0 xx.xx.xxx.2
ip route 10.18.0.0 255.255.0.0 Tunnel0
ip route 20.20.0.0 255.255.255.0 xx.xx.xxx.253
ip route 20.20.1.0 255.255.255.0 xx.xx.xxx.253
ip route 192.168.43.0 255.255.255.0 192.168.42.253
!
access-list 10 permit 10.76.129.0 0.0.0.255
access-list 10 deny any
access-list 20 permit 10.0.0.0 0.255.255.255
access-list 20 permit 192.168.0.0 0.0.255.255
access-list 20 deny any
access-list 30 permit 0.0.0.2 255.255.255.248
access-list 101 permit tcp any any eq 1494
access-list 101 permit udp any any eq 1494
access-list 102 permit udp any any range 3230 3253
access-list 102 permit udp any any range 17000 17050
access-list 102 deny ip any any fragments
access-list 102 permit udp any any range 17100 17150
access-list 102 permit udp any any range 1700 1750
access-list 102 permit tcp any any range 1700 1750
access-list 102 permit tcp any any range 3230 3235
no cdp run
!
!
!
!
!
control-plane
!
!
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
password 7 xxx
login
transport input telnet ssh
!
scheduler max-task-time 5000
end
