cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1010
Views
0
Helpful
2
Replies

Why won' t you connect....

toddyboman
Level 1
Level 1

So I have a asa 5510 in my main office.  I have 4 other remote offices that connect witha 5505 through L2L VPN.  Have for  years no problems everything is perfect.

We have added a new remote office so I am adding another 5505 to this office.  I have everything set exactly the same but this new one won't establish a VPN connection.  Have a nice interenet connection but no VPN.  Is or was there some major change in ASA Version 8.2(5) that is causing a hicup.  All my other ASA's have version 7.2(4).....

What am I missing......
Thanks!!

Result of the command: "show crypto isakmp sa"

There are no isakmp sas

Result of the command: "show crypto ipsec sa"

There are no ipsec sas

: Saved
:
ASA Version 8.2(5) 
!
hostname ********
enable password mrNAzLB3WoDGll7l encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
 switchport access vlan 12
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.90.1 255.255.255.0 
!
interface Vlan12
 nameif outside
 security-level 0
 pppoe client vpdn group AT&T
 ip address pppoe setroute 
!
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network outbound
access-list 106 extended permit ip 192.168.90.0 255.255.255.0 192.198.10.0 255.255.255.0 
access-list nonat extended permit ip 192.168.90.0 255.255.255.0 192.198.10.0 255.255.255.0 
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.90.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set MM esp-3des esp-sha-hmac 
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac 
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac 
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac 
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac 
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac 
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac 
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac 
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac 
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac 
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 90 match address 106
crypto map outside_map 90 set peer 222.222.222.22 
crypto map outside_map 90 set transform-set MM
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 43200
crypto isakmp policy 10
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group ATT request dialout pppoe
vpdn group ATT localname mm@att.net
vpdn group ATT ppp authentication pap
vpdn username mm@att.net password ***** 
dhcpd dns 208.67.222.222 208.67.220.220
dhcpd auto_config outside
!
dhcpd address 192.168.90.5-192.168.90.254 inside
dhcpd enable inside
!

threat-detection basic-threat
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
tunnel-group 222.222.222.22 type ipsec-l2l
tunnel-group 222.222.222.22 ipsec-attributes
 pre-shared-key ****
tunnel-group 77.77.777.777 type ipsec-l2l
tunnel-group 77.77.777.777 ipsec-attributes
 pre-shared-key ****
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny  
  inspect sunrpc 
  inspect xdmcp 
  inspect sip  
  inspect netbios 
  inspect tftp 
  inspect ip-options 
!
service-policy global_policy global
prompt hostname context 
no call-home reporting anonymous
Cryptochecksum:748218d8f392a0ead093b8ebd225d599
: end
no asdm history enable
2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

The above config looks OK at first glance. I assume your main site is just a replication of the same config for this site-site as the other ones you have.

When you introduce interesting traffic from the local subnet destined for the distant end, do you see the ISAKMP SA try to establish and fail? If so, the error message should be informative.

You may need to turn on debugging for the connection to get complete info - debug cry isa 7 (and maybe debug cry ips 7)

So other things came up so this problem got pushed back.......NOW its time to figure it out!!

Yes I have 4 remote sites all connecting to my main site L2L vpn perfectly.

I basicly copied and pasted those commands to the new ASA and changed the required info.

But can not establish any kind traffic between the new site and the main site.

From 5505 from New Site:

sh crypto ipsec sa
There are no isakmp sas

sh crypto ipsec sa

There are no ipsec sas

IF I try and ping the asa 5510 at my main site I recieve a 0% success rate.

I have remote access to this office so I can only currently make changes through the ASA from the asdm.

SO if I do a packet tracer from the 5505 to the 5510

Route-Look up is ok
IP-Options - ok

Nat - drops  (acl-drop) Flow is denied by configured rule.  But the rule is set the exact same as my others ASA????

Any idea what I should check? or do?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: