Windows Remote access VPN

[somnath21]

I have configured reomote access VPN in my CISCO ASA 5520 version 7.2.It's working fine in cisco client but not working for windows client using L2TP over IPSec.

I have configured it through ASDM

VPN WIZARD>Remote access VPN>select Microsoft windows client>given preshared key>authenticate using local database>given username & password>address pool>IKE policy>IPSec policy......

Please guide me into this matter..

Thanks

somnath

[wong34539]

You have to check usernames and passwords. Also verify that connection policies are being met.

After checking the credentials please go to Configuration | System | Servers | Authentication and run a Test authentication again.

IP Security Troubleshooting - Understanding and Using debug Commands :

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtml