Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have configured SNMP v3 in my Cisco 3560 switch and added it into OpManager monitoring tool (supported SNMP v3).But it's showing SNMP not enabled in that device.SNMP v1 working fine.Please find my SNMP (v3) configuration and let me know if I mis...
Hi,I have configured remote access VPN (IPsec) in my Cisco ASA . Before there was only single username & password to for VPN client. Now I am planning to give access through RADIUS server. I have configured RADIUS server in WIN 2003 server.Server co...
Hi, I need some help regarding network design. We have 40 branches , each other connected by MPLS and also to the data centre. Now we want redundant link to connect other branches with the data centre. Each branches and data centre also having intern...
Hi,I need some help regarding network design. We have 40 branches , each other connected by MPLS and also to the data centre. Now we want redundant link to connect other branches with the data centre. Each branches and data centre also having interne...
Hi,as per your guideline I have added the below mentioned lines..snmp-server view adminview internet includedsnmp-server view adminview ipAddrEntry includedsnmp-server view adminview ipRouteEntry excluded** Attached screen shot of Op Manager.But the ...
I have following range of VLAN.VLAN11=10.138.74.192/26 VLAN12=10.138.75.0/25 VLAN13=10.138.75.128/26 VLAN17=10.138.77.0/24 (server) VLAN20=10.138.75.192/27 VLAN21=10.138.75.224/27 For example: I need to give access to VLAN 12 like that...VLAN12 sould...
