cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1309
Views
0
Helpful
9
Replies

WS-SVC-FWM-1 Interface license

billybong
Level 1
Level 1

Hi Guys i needs to increase my Maximum Interfaces from to 250 to 1000, do i need to buy 3 x 250 virtual firewall licenses

 

Many thanks

Billy

9 Replies 9

Vibhor Amrodia
Cisco Employee
Cisco Employee

Hi,

Is this FWSM in Single context or multiple as in Multiple context , maximum license would be for 250.

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-6500-series-firewall-services-module/product_data_sheet0900aecd803e69c3.html

Thanks and Regards,

Vibhor Amrodia

Hi Vibhor, its a single blade ( 1 x WS-SVC-FWM-1)

Hi,

Actually i was looking for the mode in which this module is running:-

show mode

Thanks and Regards,

Vibhor Amrodia

Hi Thanks again for the help, the Module hasn't arrived yet but i'm told its a base module and to be increased to 1000 interfaces

Hi,

I would say to check the license and the mode first.

I think the license would show up as 256 in Single context(Maximum) and when you change it to multi mode , it would be 1000(maximum).

Thanks and Regards,

Vibhor Amrodia

Hi i've changed the mode to multiple and i only have 250 interfaces
 

FWSM#
FWSM# sh ve

FWSM Firewall Version 2.3(2) <system>
FWSM Device Manager Version 4.1(1)

Compiled on Wed 06-Apr-05 13:08 by dalecki

FWSM up 3 mins 48 secs

Hardware:   WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash  2.20    TOSHIBA THNCF128MBA @ 0xc321, 20MB

0: gb-ethernet0: irq 5
1: gb-ethernet1: irq 7
2: ethernet0: irq 11

Licensed Features:
Failover:           Enabled
VPN-DES:            Enabled
VPN-3DES:           Enabled
Maximum Interfaces: 256 (per security context)
Cut-through Proxy:  Enabled
Guards:             Enabled
URL-filtering:      Enabled
Throughput:         Unlimited
ISAKMP peers:       Unlimited
Security Contexts:  2

This machine has an Unrestricted (UR) license.

Serial Number: SAD091806AJ
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration has not been modified since last system restart.
FWSM# sh mode
Firewall mode: multiple
The flash mode is the SAME as the running mode.
FWSM#

 

any idea on what license i would need to have a 1000 interfaces

 

Many Thanks

Hi,

Check this:-

https://supportforums.cisco.com/document/29281/understanding-licensed-interface-counts-fwsm

Thanks and Regards,

Vibhor Amrodia

Hi

Thanks for the link it does indeed help, but which license do i buy to enable 1000 interfaces

Hi,

Would it be possible for you to upgrade the FWSM module to the latest code. I think 256 Interface on Single Context should become 1000 in multi context.

Thanks and Regards,

Vibhor Amrodia

Review Cisco Networking for a $25 gift card