12-06-2011 06:17 AM - edited 03-11-2019 02:59 PM
Hi,
I am trying to let ZFW inspect my dual-stacked hosts on my asr1001, but it does not work.
It seems that ZFW just ignores ipv6-traffic and lets it pass uninspected.
"sh ver" says:
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.2(1)S, RELEASE SOFTWARE (fc1)
...
System image file is "bootflash:asr1001-universalk9.03.05.00.S.152-1.S.bin"
...
thanks for all answers,
kind regards,
Stefan
Solved! Go to Solution.
12-08-2011 01:50 PM
I do not believe ZBF IPV6 is there in ASR 1000. Probably next year.
XE 3.6 (Mar 2012)
-Kureli
12-08-2011 01:50 PM
I do not believe ZBF IPV6 is there in ASR 1000. Probably next year.
XE 3.6 (Mar 2012)
-Kureli
12-15-2011 12:24 AM
Thais right, I received the same answer from a cisco engineer..
Thanks
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide