* PRODUCT TYPE (Model Number): CP-DX650
* EXISTING ACTIVE LOAD:sipx650.10-0-2-24
* BRIEF PROBLEM DESCRIPTION:
We need to remove the administrator / screen password in the IP Telephone model DX650.
In the cisco community forum it says that in the latest firmware we have an option to disable the administrator / screen password.
We have cisco router 2921 which has a inbuilt flash memory of 256 MB but the firmware for the telephone is 709 MB.
We need a confirmation do the latest firmware has the option to disable the administrator / screen password if so also the way forward to update the firmware directly/alternate to phone as we have a constrain of flash memory in our router.
**********************************************************************************************************************************************************
Dear Team,
We are in process of implementation of Cisco Zone based Firewall in our environment. We need a clarification as below running license included zone based firewall feature or do we have to buy a separate license to configure zone based firewall service.
Following are the permanent license installed in our router as below,
Details of router and license running in it is as below.
Device# PID SN
-------------------------------------------------
*0 CISCO2921/K9 FGL171611FK
Technology Package License Information for Module:'c2900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data None None None
Configuration register is 0x2102
And our company Cisco ID is as follows: it.ne@nesma.com
