FOSDEM is a truly unique experience and arguably the best open source
conference of the year. It is a weekend event (February 1-2 this year)
organized by open source enthusiasts to promote the widespread use of
free and open source software. Each year, du...
If you are a cisco employee, u can test the code using ASR9K devices in
lab. I did test on 172.18.87.36 (be connected to cisco vpn). The use
case of the code is that, customer has to everytime manually upload logs
and files in SR which are shared by TAC o...
Getting To Know YDKNew to the concepts behind model-based management?
Maybe you’ve heard of YANG, but you’re not sure how to navigate YANG
modules to find what you’re looking for. Or maybe you’ve found the YANG
path that will do what you want, but you’re ...
Introduction Cisco has recently introduced NETCONF/YANG support across
the enterprise network portfolio. This capability is available in the
16.3 XE code for routers and switches. NETCONF/YANG allows programmatic
access to network devices using structured...
Hello Gents, running below python 2 script in GNS3 ..telnet is successful but not configure IP address as I mentioned in the script...whats the issue? import getpassimport sysimport telnetlibHOST = "192.168.122.71"user = raw_input("Enter your us...
How would a simple YDK script would look for adding/removing ACEs in XR ACLs? Let's say we store ACEs in XML files and pass the file as an argument along with the device and the type of ACE operation (add or remove):
You may wonder how you can create a loopback interface using the OpenConfig Interface model. Here's how:
# Copyright 2016 Cisco Systems, Inc.
# Licensed under the Apache License, Version 2.0 (the "License");
# you ma...
Hi All, I'm trying to configure the SRGB value in ISIS to set the lower and upper bounds of the global label pool for segment routing using YDK and Cisco-IOS-XR-clns-isis-cfg. module: Cisco-IOS-XR-clns-isis-cfg+--rw isis+--rw instance...