Embedded Event Manager (EEM) is a powerful tool integrated with Cisco IOS Software for system management from within the device itself. EEM offers the ability to monitor events and take informational, corrective, or any desired action when the monitored events occur or when a threshold is reached.
This document helps in getting output of various troubleshooting commands when EIGRP neighbour flaps through EEM script.
Knowledge of EIGRP and working of EEM script.
Step 1:telnet the router.
IMPORTANT: console access is not reliable and will miss characters when copy/pasting, telnet/ssh using TCP will take care that all characters are received.
when I do the l2tp protocol configuration it works perfectly when I connect but I have no internet connectionusername xxx privilege 0 password 0 xxxip local pool l2tp-pool 192.168.13.7 192.168.13.12vpdn enablevpdn-group g-l2tpaccept-dialinprotocol l2tpvir...
Hi,I may be in the wrong discussion group, apologies.The company I work for will release Training Budget end January 2020. I was planning to cover my ICND 1, so I was studying for the exam prior to the course. Cisco have now moved the goal post...
Hello All, i always find STP very confusing , however i am currently studying switching and i have the below questions:- 1-i believe that the root switch election will occur before the ports goes to any state , is that true? 2-why would the...
This document shows a list of IP protocols that are possible in the protocol field of the IPv4 header. ICMP is protocol 1, TCP is 6, and UD is 17. If I use a "permit ip any any" in a Cisco extended ACL, what protocol(s) are included in the permit statemen...
Hello friendsI'm trying to recover a fallen CPI, but I get an error of insufficient space to restore the database cpis/admin# restore cpis-190814-0330__VER18.104.22.168.550_BKSZ16G_CPU4_MEM3G_RAM11G_SWAP15G_APP_CK2872026366.tar.gpg repository FTP applicati...