Verification Commandsshow mls qosTo display multilayer switching (MLS) quality of service (QoS) information, use the show mls qos command in privileged EXEC mode.show mls qos [{arp | ipv6 | ip | ipx | last | mac | module [module-number]} [interface ...

 IntroductionOtimized Edge Routing (OER) also known as Performance Routing (PFR) ia an alternative way of routing traffic. OER/PfR selects a path based on the performance of the path and hence optimizing the connections. For example, an OER enabled e...

 IntroductionThis document is an illustration of Stub, Totally Stub and NSSA area feature in an IPv6 environment. Stub, NSSA, and totally stubby are supported and configured in the exact same way as for OSPFv2 for IPv4, using the area stub, area nssa...

 IntroductionMulticast-Routing in IPv6 environment is explicitly enabeled in Global Configuration mode by command "ipv6 multicast-routing". The effect of this command is seen on all IPv6-enabled interfaces on the router which are then automatically e...

 IntroductionThe Enhanced Interior Gateway Routing Protocol (EIGRP) Stub Routing feature is typically used in a Hub and Spoke model. With Hub being at the distribution layer and Spoke at the access-layer. It conserves bandwidth and memory on the Spok...