We are pleased to announce that in December 2017 the Encrypted Traffic Analytics (ETA) CVD Guide got published and is now available on Design Zone. This CVD covers Crypto Audit and Malware Detection in Encrypted Traffic.
Why Encrypted Traffic Analytics (ETA)? The rapid rise in encrypted traffic is changing the threat landscape. As more businesses become digital, a significant number of services and applications are using encryption as the primary method of securing information.
What are the benefits of using ETA?
Faster time to response
Time and cost savings
Encrypted Traffic Analytics (Non-Fabric)
Enabling ETA and Flexible NetFlow in Campus Networks
Enabling ETA and Flexible NetFlow on Routers at the Edge and in WAN Branch Networks
Configuring Cognitive Threat Analytics with Stealthwatch
Configuring the Catalyst 9300 or Catalyst 9400
Configuring the ISR4000 and ASR1000 Family of Routers
Performing a Crypto Audit and Investigating Malware
Hi, i have SFP 1000BaseLX SFP (PID-GLC-LH-SMD) which is inserted on WS-C3560CX port, i want to use this SFP to interconnect switch WS-C3560CX and WS-C4506-E port module WS-X4712-SFP+E, could you please confirm if SFP 1000Bas...
We have a deployment we cant really figure out why we cant create the actual Fabric. Under Provision, we only have devices and services, not fabric. All software packages are installed (SD-access is "Ready"), but still no Fabric-tab. Any clues? We are run...
The Wrong Firmware was loaded onto a WS-C3850-48F-L switch thus the switch is stuck in a boot loop. I have since booted from USB with the correct firmware and the switch is up and running. If the switch is powered off It try to reboot with th...
Hey all, We have a Cisco 3945 router running 15.5(3)M9 (although that will be updated soon) and are using the webvpn via anyconnect.I wanted to monitor the vpn status via snmp i.e. number of sessions, username connected if possible.I have the snmp wa...