First connexion to 2960G using Express Setup

[rachid1974]

Hello,

I have a 2960G switch and I use the Express Setup mode to connect for the first time on the switch with Internet Explorer.

All goes well, I can connect my Laptop to the switch using 10.0.0.1 IP address (normal Ethernet cable), but a windows asks me a "user  name and password" for level 15 access, when normally there is no password and  username.

Could you help me please

[IcebergTitanic]

SHould be no username, password = cisco

[paolo bevilacqua]

This is documents, not dicussions. can you please delete this.