Support Talks Slides- How to determine a legitimate hardware issue
(Live event - Thursday 13 May, 2020 at 9:30 am Pacific/ 12:30 pm Eastern / 6:30 pm Paris)
This event had place on Thursday 13th, May 13 at 9:30hrs PST
This event helps you to understand legitimate hardware failures versus other scenarios that present themselves as hardware issues but may be something else. Use cases, examples, and steps that can be taken to differentiate between these issues are be provided.
What is Hardware Failure?
What is Non-Hardware Failure?
Hardware & Non-hardware Failure Examples
Ambrose Taylor is a Technical Leader with the Customer Delivery team at Cisco. He has over 10 years of experience in the IT industry. He has been working at Cisco for eight years, starting in the Catalyst Switching team in 2013. He has been a technical leader for Catalyst products for two years. Ambrose holds a CCIE Enterprise Infrastructure #60254.
Nathan Pan is a Technical Consulting Engineer with the Enterprise Routing and Switching team at Cisco. He has over five years of experience in the IT Industry. He has been working at Cisco for five years, starting in the Catalyst Switching team in 2016 and has been a Tech Lead in the Enterprise Switching team for three years. This year, Nathan will transition to Technical Leader for Catalyst products.
Hi Expert, I have a question about Native Vlan.We have two N9K form vPC. Let say N9K-A & N9K-B N9K A connect to a server-A with trubk port with native vlan 100.N9K B connect to a server-B with trubk port with native vlan 100. On this si...
Hi guys, Im currently assisting the network team, they want to forward specific log information from some L3, L2 protocol but not all the information to Graylog. Is there any mechanism to do, i know there is a disciminator command to filter out log b...
Hi Guys,I am trying to get a site to site tunnel connected via ISP2 on interface GigabitEthernet1/8I know that it works when I setup the same tunnel via ISP1 on interface GigabitEthernet1/1I only want to have the tunnel via ISP2 and use ISP1 for regu...
Hello all. I have two SG350XG-24F (fw ver 22.214.171.124) units in a stack ad they're uplinked to a core device via a port-channel. I wanted to enable sFlow on each of the member interfaces to get an idea of traffic on the individual units. So ...
Hello,I've a PC that don't have a native network cable adapter, so i had to buy a USB ethernet adapter, i'm having some issues to upgrade or transfer a config file via tftp. Basically I can ping from PC to Switch but i'm unable to ping from switch to PC.&...