Have you ever looked for a tool that can convert thousands of routes to summarized routes?
This tool can help you minimize the number of routing entries in the network. The tool consolidates aggregate-able IPv4 and/or IPv6 routes into summary routes. The input should contain IPv4 or IPv6 addresses with maskbits notation (x.x.x.x/y or x.x.x.x::x/y) The IP addresses can be part of existing output in e.g. 'show ip route', no need to filter the output before using this tool.
This tool can be used to summarize routes from for example:
show ip route
show ip bgp
You can use the summarized routes to create aggregate route configuration in OSPF or BGP.
Upload show ip route or show ip bgp output to the tool and run the script to get summarized routes output. Data can be copied next to the "IPv4/IPv6 routes" section as shown with the red box. Click "summary" to generate the summarised routes.
Dear expertsGood day and I hope you are doing wellWe have some industrial cisco switches for CCTV connections for some reason we need to replace with switches for other brand,We will use 4-Port Ethernet and 2-Port SFP to complete the ring topologyOur conc...
Hi - Have an odd problem I can't get to the bottom of. I have an existing network with a couple of WS-C3550-12T switches on it that link two buildings via fiber. These have been working fine for years without any problems. They are running ...
Hello we will be upgrading a pair of C6807-XL, for a client.We will go for the ''Fast Software Upgrades'' since it's the safest upgrade and the VSS is not is full production so we can have small down time.Upgrading from 15.5.1-SY5 to 15.5....
Hi!Does anybody have an example on how to get the information available in Cisco Prime GUI (Inventory / Device Management / Network Devices / Device Groups / All Devices / SwitchName) using the API?My goal is to build a list of all clients an all switches...