Webcast: Border Gateway Protocol (BGP) Fundamentals and Troubleshooting (Live Webcast Tuesday January 12, 2016 at 10:00 am Pacific Time / 1:00 pm Eastern Time)
During this live virtual event, Cisco subject matter expert Vinit Jain provides us with an overview of Border Gateway Protocol (BGP) and how to configure it as well as troubleshooting examples. The Border Gateway Protocol (BGP) is one of the most widely deployed protocols in networks today and is the definitive routing protocol in the Internet. BGP is a flexible protocol, in that a variety of options are available to network engineers. Furthermore, extensions and implementation enhancements make BGP a powerful and yet complex tool.
BGP neighbor relationships
BGP Prefix advertisement
BGP Filtering and route policy
BGP Peering Issues
Missing BGP Routes
Vinit Jainis a technical lead with the High-Touch Technical Support (HTTS) team supporting customers in areas of routing, MPLS, TE, IPv6, and multicast. He also supports a wide variety of platform issues such as high CPU; memory leaks; Cisco IOS, IOS XE, and IOS XR Software; and NxOS code base. He has delivered training within Cisco on various technologies as well as platform troubleshooting topics. He has also written a workbook about Cisco IOS XR Software fundamentals on the Cisco Support Community. Vinit has expertise in troubleshooting Service Provider, Enterprise and Data Center environments and holds holds CCIE certification (no. 22854) in R&S, Service Provider, and Security, as well as multiple certifications on programming and databases.
We look forward to your participation. This event is open to all, including partners. Please Share this event in your social channels. You have a chance to win a prize by filling out the survey after attending the live event.
Have a technical question? Get answers before opening a TAC case by visiting the Cisco Support Community.
I am pretty certain that this has worked in the past but I'm am needing to go to fiber (instead of copper) for a long run at an entertainment venue. Ports 27 and 28 on the SG300-28 switches are trunked as is port 10 on the SG300-10, 2x VLANs on all s...
I have DMVPN QOS implemeted in one tunnel associated with one physical ISP and it worked fine between the HUB and spoke , my question there will be new ISP will connect the hub and new tunnel will create it so my question can i use the same group names wh...
I purchased a refurbished WS-C3750E-48PD 48 port PoE gigabit switch for $170 with a 1 year warranty. It has the latest IOS version of 12.2(55)SE12 running image C3759-UNIVERSALK9-M.When I first got it and fired it up with a console cable attached it start...
I have created several VLANs, specifically VLAN 10 receives the internet from a Telecom router with address 192.168.1.1. The problem is that only the vlan in question browses. The others, despite having activated IPV4 Routing, do not receive a connection....
I have a 3750G that has been reset to factory default and very basic setup done so far Port 24 is set as no switchport and connected to my ISP router. I have so far set this port up as DHCP and gets IP address from the ISP router. From the switch I c...