Resolution
For Catalyst 6500/6000 Series Switches that run in Hybrid mode, the DRAM must be calculated separately for the Supervisor and Multilayer Switch Feature Card (MSFC).
Issue the show version command to get this output from the Supervisor module:
Console>show version
WS-C6009 Software, Version NmpSW: 6.2(0.11)KEY
Copyright (c) 1995-2000 by Cisco Systems
NMP S/W compiled on Oct 5 2000, 01:18:33
!--- Output suppressed.
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65408K 45402K 20006K 16384K 8683K 7701K 512K 253K 259K
Uptime is 1 day, 19 hours, 54 minutes
Console> (enable)
The Supervisor module has 64 MB (65408 KB) of DRAM present.
In order to switch the console connection physically to the MSFC on the active Supervisor Engine, use the switch console [Module Number] command.
In order to switch back to the Supervisor prompt in this mode, hold down the Ctrl key and press c three times. The exit or logout command does not work when the switch console command has been used to gain access to another module.
If only one MSFC is installed, the module number does not need to be specified. For instance, only the switch console command can be used.
Now, issue the show version command from the MSFC card:
MSFC#show version
Cisco Internetwork Operating System Software
IOS (tm) MSFC Software (C6MSFC-JSV-M),
Version 12.1(8a)E2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
!--- Output suppressed.
cisco Cat6k-MSFC (R5000) processor with 57344K/8192K bytes of memory.
!--- Output suppressed.
The MSFC card has a DRAM of 64 MB (57344 KB + 8192 KB).
For Catalyst 6500/6000 Series Switches that run in Native IOS mode, the show version command displays the combined DRAM memory from the Supervisor and MSFC.
Router#show version
Cisco Internetwork Operating System Software
!--- Output suppressed.
System image file is "sup-bootflash:c6sup22-jsv-mz"
cisco Catalyst 6000 (R7000) processor with 112640K/18432K bytes of memory.
!--- Output suppressed.
The combined DRAM memory present in the Catalyst 6500 Switch is 128 MB (112640 KB + 18432 KB).