Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Create a new article
5196
Views
1
Helpful
0
Comments

Implement, IP Helper-Address leases IPs to Remote Office via WAN

siskum
Spotlight
Spotlight

on ‎12-29-2023 06:24 AM

Cisco IP Helper-Address helps to lease IP addresses to Remote office via Serial WAN network.

The solution for Remote office client machines need to have access to a DNS server, Web Server at Cooperative office. Cisco “IP Helper-Address" command supports leasing an IP address for their clients at remote office through WAN serial connection that communication establish with a DHCP server at a Cooperative office and get access of their resources which allowed by Cooperative office. 

Step by Step implementation shows below:

IP Helper-Address Implementation_RemoteOffice .JPG

Left side of network topology is Remote Office;                                      Right side of network topology is Cooperative Office

Routers:

Cooperative office router: "MAIN"

Remote office router: "REMOTE-1"

Local office-1 router: "LOCAL-OFF-1" (VLAN10)

Local office-2 router: "LOCAL-OFF-2" (VLAN20)

Switches:

Cooperative office switches: "L2SW-MAIN-1" and  "L2SW-MAIN-2"

Local office switches: "L2SW-OFF-1" and "L2SW-OFF-2"

Configuration of "MAIN" router at Cooperative office:

Cooperative office Network topologyCooperative office Network topology

MAIN>
MAIN>enable
MAIN#config t

MAIN(config-if)#
MAIN(config)#interface GigabitEthernet0/0
MAIN(config-if)# description LAN DHCP Server Connection
MAIN(config-if)# ip address 10.68.1.2 255.255.255.0
MAIN(config-if)# ip helper-address 10.68.10.2
MAIN(config-if)# duplex auto
MAIN(config-if)# speed auto
MAIN(config-if)#
MAIN(config-if)#interface Serial0/3/0
MAIN(config-if)# description Serial WAN connection to REMOTE_1 router
MAIN(config-if)# ip address 172.16.80.1 255.255.255.252
MAIN(config-if)#
MAIN(config-if)#router eigrp 10
MAIN(config-router)# network 10.0.0.0
MAIN(config-router)# network 172.16.0.0
MAIN(config-router)#
MAIN(config-router)#ip route 10.68.10.0 255.255.255.0 172.16.80.2
MAIN(config)#ip route 192.168.100.0 255.255.255.252 172.16.80.2
MAIN(config)#ip route 10.68.20.0 255.255.255.0 172.16.80.2
MAIN(config)#ip route 192.168.200.0 255.255.255.0 172.16.80.2
MAIN(config)#ip route 0.0.0.0 0.0.0.0 Serial0/3/0
MAIN(config)#

Show run command MAIN router:

MAIN>
MAIN>enable
MAIN#sh run
Building configuration...
!
interface GigabitEthernet0/0
description LAN DHCP Server Connection
ip address 10.68.1.2 255.255.255.0
ip helper-address 10.68.10.2
duplex auto
speed auto
!
interface Serial0/3/0
description Serial WAN connection to REMOTE_1 router
ip address 172.16.80.1 255.255.255.252
!
!
interface Vlan1
no ip address
shutdown
!
router eigrp 10
network 10.0.0.0
network 172.16.0.0
!
ip classless
ip route 10.68.10.0 255.255.255.0 172.16.80.2
ip route 192.168.100.0 255.255.255.252 172.16.80.2
ip route 10.68.20.0 255.255.255.0 172.16.80.2
ip route 192.168.200.0 255.255.255.0 172.16.80.2
ip route 0.0.0.0 0.0.0.0 Serial0/3/0
!

Cooperative office DHCP Server configuration:

Assign static IP to DHCP Server:

Assign Static IP address to DHCP ServerAssign Static IP address to DHCP Server

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

Configure DHCP Server:

Configure DHCP Server for VLANsConfigure DHCP Server for VLANs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 




 

 

 

Remote Office Routers configurations:

Remote Office Network topologRemote Office Network topolog

 

REMOTE-1 Router:

REMOTE-1>enable
REMOTE-1#conf t
REMOTE-1(config)#interface GigabitEthernet0/0
REMOTE-1(config-if)# description Connection to LOCAL_OFF_1 router
REMOTE-1(config-if)# ip address 192.168.100.2 255.255.255.252
REMOTE-1(config-if)# ip helper-address 10.68.1.1
REMOTE-1(config-if)# duplex auto
REMOTE-1(config-if)# speed auto
REMOTE-1(config-if)#
REMOTE-1(config-if)#interface GigabitEthernet0/1
REMOTE-1(config-if)# description Connection to LOCAL-OFF-2 router
REMOTE-1(config-if)# ip address 192.168.200.2 255.255.255.252
REMOTE-1(config-if)# ip helper-address 10.68.1.1
REMOTE-1(config-if)# duplex auto
REMOTE-1(config-if)# speed auto
REMOTE-1(config-if)#
REMOTE-1(config-if)#interface Serial0/3/0
REMOTE-1(config-if)# description Serial WAN connection to MAIN router
REMOTE-1(config-if)# ip address 172.16.80.2 255.255.255.252
REMOTE-1(config-if)# clock rate 2000000
REMOTE-1(config-if)#
REMOTE-1(config-if)#
REMOTE-1(config-if)#interface Vlan1
REMOTE-1(config-if)# no ip address
REMOTE-1(config-if)# shutdown
REMOTE-1(config-if)#
REMOTE-1(config-if)#router eigrp 10
REMOTE-1(config-router)# network 172.16.0.0
REMOTE-1(config-router)# network 192.168.0.0
REMOTE-1(config-router)# network 192.168.200.0
REMOTE-1(config-router)#
REMOTE-1(config-router)#ip route 10.68.10.0 255.255.255.0 192.168.100.1
REMOTE-1(config)#ip route 10.68.1.0 255.255.255.0 172.16.80.1
REMOTE-1(config)#ip route 10.68.20.0 255.255.255.0 192.168.200.1
REMOTE-1(config)#
REMOTE-1(config)#

Show run command REMOTE-1 router:

REMOTE-1>
REMOTE-1>enable
REMOTE-1#sh run
!
hostname REMOTE-1
!
!
interface GigabitEthernet0/0
description Connection to LOCAL_OFF_1 router
ip address 192.168.100.2 255.255.255.252
ip helper-address 10.68.1.1
duplex auto
speed auto
!
interface GigabitEthernet0/1
description Connection to LOCAL-OFF-2 router
ip address 192.168.200.2 255.255.255.252
ip helper-address 10.68.1.1
duplex auto
speed auto
!
interface Serial0/3/0
description Serial WAN connection to MAIN router
ip address 172.16.80.2 255.255.255.252
clock rate 2000000
!
!
router eigrp 10
network 172.16.0.0
network 192.168.0.0
network 192.168.200.0
!
ip classless
ip route 10.68.10.0 255.255.255.0 192.168.100.1
ip route 10.68.1.0 255.255.255.0 172.16.80.1
ip route 10.68.20.0 255.255.255.0 192.168.200.1
!

Local Office Router-1 Configuratons:

LOCAL-OFF-1>
LOCAL-OFF-1>enable
LOCAL-OFF-1#
LOCAL-OFF-1#
LOCAL-OFF-1#conf t
LOCAL-OFF-1(config)#
LOCAL-OFF-1(config)#
LOCAL-OFF-1(config)#interface GigabitEthernet0/0
LOCAL-OFF-1(config-if)# description connection to Local OFFICE-1 VALN-10
LOCAL-OFF-1(config-if)# ip address 10.68.10.1 255.255.255.0
LOCAL-OFF-1(config-if)# ip helper-address 10.68.1.1
LOCAL-OFF-1(config-if)# duplex auto
LOCAL-OFF-1(config-if)# speed auto
LOCAL-OFF-1(config-if)#
LOCAL-OFF-1(config-if)#interface GigabitEthernet0/1
LOCAL-OFF-1(config-if)# description WAN connection to REMOTE-1 router
LOCAL-OFF-1(config-if)# ip address 192.168.100.1 255.255.255.252
LOCAL-OFF-1(config-if)# duplex auto
LOCAL-OFF-1(config-if)# speed auto
LOCAL-OFF-1(config-if)#
LOCAL-OFF-1(config-if)#interface Vlan1
LOCAL-OFF-1(config-if)# no ip address
LOCAL-OFF-1(config-if)# shutdown
LOCAL-OFF-1(config-if)#
LOCAL-OFF-1(config-if)#router eigrp 10
LOCAL-OFF-1(config-router)# network 10.0.0.0
LOCAL-OFF-1(config-router)# network 192.168.100.0
LOCAL-OFF-1(config-router)#
LOCAL-OFF-1(config-router)#ip route 172.16.80.0 255.255.255.252 192.168.100.2
LOCAL-OFF-1(config)#ip route 10.68.1.0 255.255.255.0 192.168.100.2
LOCAL-OFF-1(config)#ip route 10.68.20.0 255.255.255.0 192.168.100.2
LOCAL-OFF-1(config)#!
LOCAL-OFF-1(config)#
LOCAL-OFF-1(config)#

Show run command LOCAL-OFF-1 router:

LOCAL-OFF-1>
LOCAL-OFF-1>enable
LOCAL-OFF-1#sh run
!
hostname LOCAL-OFF-1
!
interface GigabitEthernet0/0
description connection to Local OFFICE-1 VALN-10
ip address 10.68.10.1 255.255.255.0
ip helper-address 10.68.1.1
duplex auto
speed auto
!
interface GigabitEthernet0/1
description WAN connection to REMOTE-1 router
ip address 192.168.100.1 255.255.255.252
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router eigrp 10
network 10.0.0.0
network 192.168.100.0
!
ip classless
ip route 172.16.80.0 255.255.255.252 192.168.100.2
ip route 10.68.1.0 255.255.255.0 192.168.100.2
ip route 10.68.20.0 255.255.255.0 192.168.100.2
!
!
line con 0
!

Local Office Router-2 Configuratons:

LOCAL-OFF-2>
LOCAL-OFF-2>enable
LOCAL-OFF-2#conf t
LOCAL-OFF-2(config)#
LOCAL-OFF-2(config)#interface GigabitEthernet0/0
LOCAL-OFF-2(config-if)# description Connection to Local Office-2 VLAN-20
LOCAL-OFF-2(config-if)# ip address 10.68.20.1 255.255.255.0
LOCAL-OFF-2(config-if)# ip helper-address 10.68.1.1
LOCAL-OFF-2(config-if)# duplex auto
LOCAL-OFF-2(config-if)# speed auto
LOCAL-OFF-2(config-if)#
LOCAL-OFF-2(config-if)#interface GigabitEthernet0/1
LOCAL-OFF-2(config-if)# description WAN connection to REMOTE-1 router
LOCAL-OFF-2(config-if)# ip address 192.168.200.1 255.255.255.252
LOCAL-OFF-2(config-if)# duplex auto
LOCAL-OFF-2(config-if)# speed auto
LOCAL-OFF-2(config-if)#
LOCAL-OFF-2(config-if)#interface Vlan1
LOCAL-OFF-2(config-if)# no ip address
LOCAL-OFF-2(config-if)# shutdown
LOCAL-OFF-2(config-if)#
LOCAL-OFF-2(config-if)#router eigrp 10
LOCAL-OFF-2(config-router)# network 10.0.0.0
LOCAL-OFF-2(config-router)# network 172.168.0.0
LOCAL-OFF-2(config-router)# network 192.168.200.0
LOCAL-OFF-2(config-router)#
LOCAL-OFF-2(config-router)#ip route 10.68.1.0 255.255.255.0 192.168.200.2
LOCAL-OFF-2(config)#ip route 192.168.100.0 255.255.255.252 192.168.200.2
LOCAL-OFF-2(config)#ip route 172.16.80.0 255.255.255.252 192.168.200.2
LOCAL-OFF-2(config)#

Show Run command LOCAL-OFF-2 router:

LOCAL-OFF-2>
LOCAL-OFF-2>enable
LOCAL-OFF-2#sh run
!
hostname LOCAL-OFF-2
!
interface GigabitEthernet0/0

description Connection to Local Office-2 VLAN-20
ip address 10.68.20.1 255.255.255.0
ip helper-address 10.68.1.1
duplex auto
speed auto
!
interface GigabitEthernet0/1
description WAN connection to REMOTE-1 router
ip address 192.168.200.1 255.255.255.252
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router eigrp 10
network 10.0.0.0
network 172.168.0.0
network 192.168.200.0
!
ip classless
ip route 10.68.1.0 255.255.255.0 192.168.200.2
ip route 192.168.100.0 255.255.255.252 192.168.200.2
ip route 172.16.80.0 255.255.255.252 192.168.200.2
!
line con 0
!
line aux 0


LOCAL OFFICE-1 VLAN-10 IP leasing using IP Helper-Address:

Local Office-1 VLAN-10Local Office-1 VLAN-10

Client Laptop get lease IP from DHCP ServerClient Laptop get lease IP from DHCP Server

 

 

 

 

 

 

 

 




 

 

 

LOCAL OFFICE-2 VLAN-20 IP leasing using IP Helper-Address:

Local Office-2 VLAN-20Local Office-2 VLAN-20Client PC get lease IP from DHCP ServerClient PC get lease IP from DHCP Server

 

 

 

 

 

 

 

 

 

 

Preview file
131 KB
Preview file
91 KB
Preview file
71 KB
Preview file
46 KB
Preview file
52 KB
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents

Review Cisco Networking for a $25 gift card