11-01-2010 11:40 PM - edited 03-01-2019 04:34 PM
Does anyone know what this means?
Oct 28 13:41:52: %ILPOWER-7-DETECT: Interface Fa0/20: Power Device detected: IEEE PD
Oct 28 13:41:52: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/20: Power Controller reports power Imax error detected
Oct 28 13:42:01: %ILPOWER-7-DETECT: Interface Fa0/20: Power Device detected: IEEE PD
Oct 28 13:42:01: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/20: Power Controller reports power Imax error detected
Oct 28 13:42:10: %ILPOWER-7-DETECT: Interface Fa0/20: Power Device detected: IEEE PD
Oct 28 13:42:11: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/20: Power Controller reports power Imax error detected
Oct 28 13:42:20: %ILPOWER-7-DETECT: Interface Fa0/20: Power Device detected: IEEE PD
Oct 28 13:42:20: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/20: Power Controller reports power Imax error detected
Oct 28 13:42:30: %ILPOWER-7-DETECT: Interface Fa0/20: Power Device detected: IEEE PD
Oct 28 13:42:30: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/20: Power Controller reports power Imax error detected
Oct 28 13:42:40: %ILPOWER-7-DETECT: Interface Fa0/20: Power Device detected: IEEE PD
Oct 28 13:42:40: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/20: Power Controller reports power Imax error detected
show power inline
Available:370.0(w) Used:199.2(w) Remaining:170.8(w)
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa0/1 auto on 8.3 Ieee PD 3 15.4
Fa0/2 auto on 8.3 Ieee PD 2 15.4
Fa0/3 auto on 8.3 Ieee PD 3 15.4
Fa0/4 auto on 8.3 Ieee PD 2 15.4
Fa0/5 auto on 8.3 Ieee PD 3 15.4
Fa0/6 auto on 8.3 Ieee PD 2 15.4
Fa0/7 auto on 8.3 Ieee PD 3 15.4
Fa0/8 auto on 8.3 Ieee PD 3 15.4
Fa0/9 auto on 8.3 Ieee PD 2 15.4
Fa0/10 auto on 8.3 Ieee PD 3 15.4
Fa0/11 auto on 8.3 Ieee PD 3 15.4
Fa0/12 auto on 8.3 Ieee PD 3 15.4
Fa0/13 auto on 8.3 Ieee PD 3 15.4
Fa0/14 auto on 8.3 Ieee PD 3 15.4
Fa0/15 auto on 8.3 Ieee PD 3 15.4
Fa0/16 auto on 8.3 Ieee PD 3 15.4
Fa0/17 auto on 8.3 Ieee PD 3 15.4
Fa0/18 auto on 8.3 Ieee PD 3 15.4
Fa0/19 auto on 8.3 Ieee PD 3 15.4
Fa0/20 auto on 8.3 Ieee PD 2 15.4
Fa0/21 auto off 0.0 n/a n/a 15.4
Fa0/22 auto off 0.0 n/a n/a 15.4
Fa0/23 auto on 8.3 Ieee PD 3 15.4
Fa0/24 auto off 0.0 n/a n/a 15.4
Fa0/25 auto on 8.3 Ieee PD 3 15.4
Fa0/26 auto off 0.0 n/a n/a 15.4
Fa0/27 auto on 8.3 Ieee PD 3 15.4
Fa0/28 auto on 8.3 Ieee PD 3 15.4
Fa0/29 auto off 0.0 n/a n/a 15.4
Fa0/30 auto off 0.0 n/a n/a 15.4
Fa0/31 auto off 0.0 n/a n/a 15.4
Fa0/32 auto off 0.0 n/a n/a 15.4
Fa0/33 auto off 0.0 n/a n/a 15.4
Fa0/34 auto off 0.0 n/a n/a 15.4
Fa0/35 auto off 0.0 n/a n/a 15.4
Fa0/36 auto off 0.0 n/a n/a 15.4
Fa0/37 auto off 0.0 n/a n/a 15.4
Fa0/38 auto off 0.0 n/a n/a 15.4
Fa0/39 auto off 0.0 n/a n/a 15.4
Fa0/40 auto off 0.0 n/a n/a 15.4
Fa0/41 auto off 0.0 n/a n/a 15.4
Fa0/42 auto off 0.0 n/a n/a 15.4
Fa0/43 auto off 0.0 n/a n/a 15.4
Fa0/44 auto off 0.0 n/a n/a 15.4
Fa0/45 auto off 0.0 n/a n/a 15.4
Fa0/46 auto off 0.0 n/a n/a 15.4
Fa0/47 auto off 0.0 n/a n/a 15.4
Fa0/48 auto off 0.0 n/a n/a 15.4
show ver
cisco WS-C3560-48PS (PowerPC405) processor (revision P0) with 122880K/8184K bytes of memory.
Processor board ID FDO1216Z2W0
Last reset from power-on
3 Virtual Ethernet interfaces
48 FastEthernet interfaces
4 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:21:1C:F6:72:00
Motherboard assembly number : 73-9676-13
Power supply part number : 341-0029-05
Motherboard serial number : FDO12160GPA
Power supply serial number : LIT1212056A
Model revision number : P0
Motherboard revision number : A0
Model number : WS-C3560-48PS-S
System serial number : FDO1216Z2W0
SFP Module assembly part number : 73-7757-03
SFP Module revision Number : A0
SFP Module serial number : FDO12150VK8
Top Assembly Part Number : 800-25859-04
Top Assembly Revision Number : A0
Version ID : V05
CLEI Code Number : COMU210ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C3560-48PS 12.2(35)SE5 C3560-IPBASE-M
Configuration register is 0xF
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: