Technote of the day (TOTD) -- How to configure External Authentication for users using TACACS on the Cisco DNAC?
Prepared for: Cisco DNA Customers, CX Support Teams
Prepared by: Tomas de Leon, Technical Leader Feb 16, 2019
Document number: 02162019_v1
Objective
The objective of this document is to provide users an example of enabling external authentication for access to the Cisco DNAC. This technote will focus on configuring the Cisco DNAC & the Cisco ISE for using the TACACS protocol for user authentication. For this technote, there is an assumption that the integration between the Cisco DNAC and the Cisco ISE is already configured and in an "Active" state.
Goals
Provide an example of configuring the Cisco DNAC & the Cisco ISE for using the TACACS protocol for external authentication of users.
The following technote is written against the Cisco DNA Center version 1.2.8 Patch Release and the Cisco ISE version 2.4.0.357 Patch 5. The following technote is written to help answer the questions in regards to configuring the Cisco DNAC & the Cisco ISE for using the TACACS protocol for user authentication.
Reference Information:
- Cisco DNAC version 1.2.8
- Cisco ISE version 2.4.0.357 Patch 5
Cisco Digital Network Architecture Center Administrator Guide, Release 1.2.8
Chapter: Manage Users
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna...
** The complete Tech Note is attached in a PDF file.