Join us live tomorrow December 18th at 9 am PT as we explore features of
the new Catalyst 9200 switch and the Catalyst 9800 Wireless Controller
with Greg Doria and Munider Sambi. Join the conversation - post your
Join us November 15 at 10 am PT as we talk to Cisco’s senior Enterprise
Networks executives about our recent announcements around SD-WAN and the
Catalyst expansion. As always, our Cisco experts are ready to answer
your questions, so post them below.
Hello. I need help if the EEM doesn't work because of a switch platform or EEM configuration.I configured EEM on the switch as follows:Swtich # show run!process cpu threshold type total rising 90 interval 5 switch 1!event manager applet CPU_Monitorev...
've deployed 4- 9300's in two stacks. All 4 switches areC9300-48P Ver 16.9.2Stack 1: SW2- SW3 (no issues)Stack 2: SW4- SW5 (VoIP POE issues)The second stack of two has number of Cisco VoIP phones that will not negotiate for power (about 10). wh...
Hello, I have to migrate from 2 swithces multilayer to 1, each switch has a different configuration and you have the following SVISW1Vlan100 interface description << VLAN WAN INTERNET >> ip address 126.96.36.199 255.255.255.24...
We recently upgraded our internet services from 100MB to 500MB. We manage the router for this connection and currently have a Cisco 2911 router for connectivity and we are unable to get more than 160MB throughput. We are wondering if we can get more out o...