06-14-2024 06:41 AM
I am currently facing an issue with one of my ikev2 vpns. The issue is that some remote ips that are on the vpn are unreachable (these were working earlier) and giving send errors on phase 2 output when i try sending any traffic. On the phase 1 it shows its on status: in-neg and says initiator waiting for auth response. What could be the issue and how can it be solved?
06-14-2024 06:54 AM
Hello @NetworkerC
If phase 1 is stuck on "initiator waiting for auth response," it sould be an issue with authentication.
--This could be due to incorrect credentials, certificates, or pre-shared keys...
06-14-2024 07:01 AM
I run lab last week and believe me it take two long weekend days to solve issue same as this
please share the crypto ikev2 profile and keyring (hide the password) <<- both peer please
MHM
06-14-2024 07:39 AM
You can look at this and let me know
06-14-2024 08:50 AM
It seem you use public IP
so I could not know if the IP is correct or not
can you share
debug crypto ikev2 error
MHM
09-20-2024 07:41 AM
Probably you might be hitting the below FN.
https://www.cisco.com/c/en/us/support/docs/field-notices/725/fn72510.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide