05-14-2024 05:27 PM
Hi everyone
Hope u´re great, I really need help, I got a topology 3 routers OSPF is running well, on router 2 I configured a DHCP, on router 1 Gi0/0/0 its a ip helper address pointing to Router 2, but DHCP failed, someone can help me pls
05-15-2024 12:09 AM
How is your switch config ? is the switch also participate in IGP (OSPF) ?
in the DHCP you have 192.168.2.0/24 - you should have default-router in same subnet 192.168.2.1
that can be created on Router or on the switch - so make sure you have routing in place to reach the 192.168.2.0/24 subnet.
default-router 192.168.2.1
Then on switch side you can have trunk associated VLAN
05-15-2024 07:41 AM
Hello @victor-gutierrez
Ensure to configure Ronter On A Stick on Gig0/0/0 Router1 facing Switch3. Same on Gig 0/0/0/1 facing Switch.
Follow this:
https://www.ciscopress.com/articles/article.asp?p=3089357&seqNum=5
On th sub interface dedicated to the vlan of PCs, add the ip helper-address command.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide