06-20-2019 08:55 AM
I tried all the way but not getting a solution to connect my gns3 topology devices through SSH using an IP address in PuTTy or Secure CRT. If anyone has the solution kindly help me out.
Solved! Go to Solution.
06-20-2019 09:54 AM
Hi
If you are trying to ssh from your pc/laptop then you need to connect gns3 device to the external network.
http://www.smartpctricks.com/2014/06/connecting-gns3-real-networks.html
06-20-2019 09:50 AM
you need
line vty 0 4
login local
transport input all
username x password y
ip domain-name cisco.com
crypto key generate rsa
06-20-2019 06:57 PM
Thanks for your reply Sir. But this is minimal configuration required for SSH and so you can access your device from the device only using ssh.
06-20-2019 09:54 AM
Hi
If you are trying to ssh from your pc/laptop then you need to connect gns3 device to the external network.
http://www.smartpctricks.com/2014/06/connecting-gns3-real-networks.html
06-20-2019 10:55 PM
06-20-2019 05:53 PM
06-20-2019 07:08 PM
Thanks for your reply, sir. But that is available for telnet connection to GNS3 images. My query is for access to the device using the IP address directly in the PuTTy with ssh connection.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide