12-23-2018 02:29 AM
Hi.
Does Family Shield have IPv6 DNS server addresses?
I can find the IPv4 DNS server addresses for Family Shield (208.67.222.123). However, what is the Family Shield equivalent of 2620:119:35::35?
12-23-2018 02:49 AM
If you have dual-stack connectivity, you use these addresses for FamilyShield:
::ffff:d043:de7b and ::ffff:d043:dc7b
12-23-2018 11:01 AM
Thank you rotblitz. I'll give that a try.
07-04-2020 11:39 PM
I know this is an old thread but in case some one reads this (like me), be aware that any address starting with "::", "fc", "fd", or "fe" are unable to work with the public IPv6 Internet. (source: http://www.test-ipv6.com/ faq:No IPv6 tab) Therefore, using these CANNOT access ANY IPv6 referenced sites (destination).
Not sure how much of an issue this might be but someone posted these (unverified) stats:
https://support.opendns.com/hc/en-us/community/posts/115001087127-IPv6-feature-parity-needed
The above stats emphasize the protocol that users are using (origin). I believe the important part is NOT which protocol users use (starting point or origin) to reach a site but rather which protocol a site (destination) uses to reach it.
07-05-2020 05:06 AM
“Therefore, using these CANNOT access ANY IPv6 referenced sites (destination).”
This is wrong. You definitely can raise DNS queries for AAAA records over IPv4. No limitation, you can reach every IPv6 destination over IPv6.
07-25-2020 09:45 PM
@roblitz please clarify.... I do not know what AAAA records are. Are you saying that the info above is inaccurate and that OpenDNS can access all IPv6 destinations? even with addresses starting as noted above, which the OpenDNS DNS does start with "::"?
P.S. I am not well versed in this stuff. I just found the above at what I believe is a respected site.
I am also trying to understand your replies re: IPv4 vs IPv6 in light of the results I get below from the http://www.test-ipv6.com/ website.
07-27-2020 06:05 AM
DNS record types are excellently documented on the internet. No reason to repeat it here. You can query IPv6 destinations via IPv4. And OpenDNS does not need to access anything. DNS is the phone book of the internet, not the phone lines.
You do not seem to have had IPv6 connectivity when you ran the test, at least not from this device.
07-27-2020 11:12 PM
Thanks for the reply. I do not need to know the technical details. I do understand that DNS is the "phone book". My understanding is that IPv6 and IPv4 are essentially addressing protocols. Just for clarity, are you saying the comment by the above test site "any address starting with "::", "fc", "fd", or "fe" are unable to work with the public IPv6 Internet." is incorrect?
Also, I am unclear what the implications of my test results mean, as they appear conflicting to me:
That latter, and your comment "You can query IPv6 destinations via IPv4." suggest that there is no restriction to access IPv6 sites but then the last comment from the test seems to contradict. Can you shed light on this as to its implications?
07-28-2020 05:23 AM
Everything’s correct. It looks like you sometimes have no IPv6 connectivity, as the test results indicate. I’m not in the position to explain someone’s conflicting web page test results, but I think this is in error, because it does not make sense to me.
And again, there are no restrictions to query IPv6 destinations, but connecting to them if you don’t have IPv6 connectivity. All clear now?
07-28-2020 10:42 PM
Thanks for the help. Tried another test site that shed a bit more light on this but still leaves me with some questions.
My router shows that I have a valid IPv4 and IPv6 IP addresses from my ISP and I have both IPv4 and IPv6 DNS entries in my router to OpenDNS (which I now understand only provides IPv4 DNS's at this time) and yet 2 different test sites tell me I do not have IPv6 connectivity. So now I am left with the mystery as to why. Is it because of my ISP, because of the router, or because of OpenDNS? That is what still has me puzzled.
Fortunately it has not impacted me yet as I have not run into a site I cannot reach.
07-29-2020 02:40 AM
“I now understand only provides IPv4 DNS's at this time”
You still didn’t get it. If you query a domain’s IPv6 address, OpenDNS gives you this information, always, if it has one, regardless if you query this over IPv4 or over IPv6. However, if you query over IPv6, your dashboard settings are not taken care of, because you cannot register your IPv6 address at the dashboard. In addition, there are no FamilyShield IPv6 resolver addresses yet.
I cannot comment on your other IPv6 problems, because they have nothing to do with OpenDNS.
I’m out here now, because the question after the FamilyShield addresses has been more than fully and completely answered, even over two different threads.
07-29-2020 06:31 PM
No...I did get it re: IPv6...I just did not word my response correctly as I was simply thinking about connectivity.
Thanks for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide