05-04-2019 02:44 AM
Hi
OpenDNS has suddenly stopped working. On the dashboard settings page my IP is correct and matches, and updates when I reset my router. Here are my settings for IPv4 and IPv6. Is this right or do I also need to fill out the top fields?
Other than this I cannot see what the issue is. Would appreciate help to get OpenDNS up and running for good.
cheers.
05-04-2019 06:22 AM
Your settings on the computer look fine. Do not touch the top fields! But I need more information. Copy & paste the complete plain text output of the following diagnostic commands to here:
nslookup -type=txt debug.opendns.com.
nslookup whoami.akamai.net.
netsh interface ipv4 show config
netsh interface ipv6 show dnsservers
05-04-2019 07:01 AM
Hi thanks for getting back to me! Here you go:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\James>nslookup -type=txt debug.opendns.com
Server: UnKnown
Address: 208.67.222.220
opendns.com
primary name server = auth1.opendns.com
responsible mail addr = noc.opendns.com
serial = 1556977899
refresh = 16384 (4 hours 33 mins 4 secs)
retry = 2048 (34 mins 8 secs)
expire = 1048576 (12 days 3 hours 16 mins 16 secs)
default TTL = 2560 (42 mins 40 secs)
C:\Users\James>nslookup whoami.akamai.net
Server: UnKnown
Address: 208.67.222.220
Non-authoritative answer:
Name: whoami.akamai.net
Address: 90.207.224.7
C:\Users\James>netsh interface ipv4 show config
Configuration for interface "Wireless Network Connection 2"
DHCP enabled: Yes
InterfaceMetric: 5
Statically Configured DNS Servers: 208.67.222.123
208.67.220.123
Register with which suffix: Primary only
WINS servers configured through DHCP: None
Configuration for interface "Wireless Network Connection"
DHCP enabled: Yes
IP Address: 192.168.0.30
Subnet Prefix: 192.168.0.0/24 (mask 255.255.255.0)
Default Gateway: 192.168.0.1
Gateway Metric: 0
InterfaceMetric: 25
Statically Configured DNS Servers: 208.67.222.123
208.67.220.123
Register with which suffix: Primary only
WINS servers configured through DHCP: None
Configuration for interface "Local Area Connection"
DHCP enabled: Yes
InterfaceMetric: 5
Statically Configured DNS Servers: 208.67.222.123
208.67.220.123
Register with which suffix: Primary only
WINS servers configured through DHCP: None
Configuration for interface "Loopback Pseudo-Interface 1"
DHCP enabled: No
IP Address: 127.0.0.1
Subnet Prefix: 127.0.0.0/8 (mask 255.0.0.0)
InterfaceMetric: 50
Statically Configured DNS Servers: None
Register with which suffix: Primary only
Statically Configured WINS Servers: None
C:\Users\James>netsh interface ipv6 show dnsservers
Configuration for interface "Wireless Network Connection 2"
DNS servers configured through DHCP: ::ffff:208.67.222.220
::ffff:208.67.220.222
Register with which suffix: Primary only
Configuration for interface "Wireless Network Connection"
DNS servers configured through DHCP: ::ffff:208.67.222.220
::ffff:208.67.220.222
Register with which suffix: Primary only
Configuration for interface "Local Area Connection"
DNS servers configured through DHCP: ::ffff:208.67.222.220
::ffff:208.67.220.222
Register with which suffix: Primary only
Configuration for interface "Loopback Pseudo-Interface 1"
Statically Configured DNS Servers: fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
Register with which suffix: Primary only
Configuration for interface "isatap.Home"
Statically Configured DNS Servers: None
Register with which suffix: None
Configuration for interface "Teredo Tunneling Pseudo-Interface"
Statically Configured DNS Servers: None
Register with which suffix: None
-
Cheers!
05-05-2019 07:57 AM
It looks like Sky started "suddenly" to redirect your DNS traffic to their own DNS service. But you are not alone. See https://support.opendns.com/hc/en-us/community/posts/360043501972
Also, you don't seem to have IPv6 connectivity, so you do not need to care about IPv6 settings.
05-05-2019 09:53 AM
Thanks for the update.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide