12-03-2020 08:59 PM
I have set up a network with OpenDNS which doesn't seem to working correctly.
I'm using Opendns updater 2.2.1, when I open it it says in red at bottom:
"Looks like there's no internet connectivity"
For the IP address, it's blank, but other things are correct like OpenDNS account email.
My internet is running fine.
I have check my Firewall, the application Opendns updater 2.2.1 is not blocked, I added it manually, because originally Opendns updater 2.2.1 was not not listed in on my firewall.
Windows 10 Pro, Version 1909,
02-25-2021 07:44 AM
rotblitz and everyone pls
sir kindly help me with this
i have done all the thing which you said privious command
04-27-2021 07:21 AM
I was having a similar problem and found that the issue for me is I was using IPv6 instead of IPv4 (Which this doesn't support). I turned off IPv6 in my router and everything connected up directly after.
It doesn't look like this is the original poster's issue, but I was getting the same results in error and thought I would pass it along for anyone who may have had my same issue.
06-11-2021 12:13 AM
Thank you all for contributing to this issue. For me disabling ipv6 on my router resolved the issue
09-26-2021 05:58 PM
Hi Rotblitz,
My openDNS updater shows the same error. There is no IP address. Error msg: Looks like there is no internet connectivity.
I checked my ip address in http://myip.dnsomatic.com/, it shows 113.211.208.174.
IP address that is registered with the network at https://dashboard.opendns.com/settings/ 113.211.208.174.
C:\Users\USER>nslookup myip.opendns.com
Server: ns8.maxis.net.my
Address: different ip address from above.
Name: myip.opendns.com
i tested DNS configuration and it is working fine.
i try to disable tcp/ip v6 and my youtube video and discord cannot load properly even when i did not block it. Please help.
09-27-2021 01:28 AM
Hi Roblitz,
I just key in command prompt: nslookup myip.opendns.com
Server: UnKnown
Address: ::ffff:208.67.220.222
*** UnKnown can't find myip.opendns.com: No response from server. What happen? Please help.
07-02-2022 12:21 PM
set DNS of OpenDNS to Network Interface Card (208.67.222.222 / 208.67.220.220) and type in the command line
nslookup -type=txt debug.opendns.com.
this show
C:\Users\xxxxxxx>nslookup -type=txt debug.opendns.com
Servidor: dns.opendns.com
Address: 208.67.222.222
Respuesta no autoritativa:
debug.opendns.com text =
"server r1004.mex1"
debug.opendns.com text =
"flags 20040020 0 50 180000000000000000003950000140010400000"
debug.opendns.com text =
"originid 588325141"
debug.opendns.com text =
"actype 2"
debug.opendns.com text =
"bundle 13491467"
debug.opendns.com text =
"source 189.190.142.240:63601"
its works, and enjoy!!!
09-27-2022 10:05 PM
I was having the same issue and after I disabled IPV6 on the network adaptor the issue was resolved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide