04-17-2018 05:13 AM - edited 03-01-2019 05:24 PM
I wold like to know, if catalyst 2960 L Series is compatibility with Transceiver Model GLC-LH-SMD.
Becouse I don't undertend the compatibility matrix!
I have the scenario, when i need to confirm if the compatibility is correct in this case.
Where I can to connect ws-c3850-12-s-s with ws-c2960L-PS-LL to used the transceiver GLC-LH-SMD between the two device.
There are two boxes, all transceivers of the second coffin are compatible with the first box?
The link of Matrix:
Thanks..
04-17-2018 10:14 AM
Yes it the GLC-LH-SMD is compatible with the WS-C2960L-PS-LL and WS-C3850-12-s-s switches. Sorry, but I don't understand your question or what you are finding confusing about the table. If you could elaborate, I may be better able to provide an explanation.
Regards
04-24-2018 06:51 AM
04-17-2018 03:35 PM
What is the distance between the two?
04-24-2018 06:52 AM
04-24-2018 04:53 PM
@Neojimmy wrote:
About 500 mm.
The distance between the 2 optics is only 500 mm and you want to use LH optics?
Is there a deliberate intention to permanently damage the optics?
04-25-2018 05:30 AM
The 1000BASE-LX/LH optics will operate properly in a back-to-back installation (no damage). But, the cost for the optic modules will be higher vs using a 1000BASE-SX modules.
04-25-2018 06:08 AM
04-25-2018 06:19 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide