Not Getting 10Gbps Speed (Using SFP Port) in ESS 3300 Switch

[Deva Praba]

Dear All,

I am Using ESS 3300 Switch ( which has 2 x 10GbE SFP Port) for 10Gbps SFP.

While doing speed test, I unable to get  10Gbps in both sending & Receiving.

Instead, i could get only 1Gbps (max.).

I want to know the maximum data rate which can get in 10G SFP Port using ESS 3300 switch.

Kindly do the needful.

[MHM Cisco World]

https://www.cisco.com/c/en/us/products/collateral/switches/embedded-service-3000-series-switches/embedded-services-3300-series-ds.html

[Flavio Miranda]

Looking at the Data Sheet, you can see that it states that downlink is 1 Giga.

==> 10G uplinks, 1G downlinks:

Enables high-quality video and data communication for next generation of bandwidth-intensive use cases such as tactical data centers, HD video surveillance, self-driving vehicles, and future-proofing

Not sure to what you are apply this, but it seems to that this switch is a good fit for streaming.  Video streams requires a very good uplink but not a so good uplink and the video would be broadcasted.