The ping test failed in the EVPN VxLAN environment

[goyourmin]

hello !

I had a successful ping test between virtual hosts(VPCS : SRV1-SRV2).

However, if you ping test from the Leaf1 to the virtual host(SRV2) under Leaf3, it fails. The reverse is the same.

Can these ping test failures be considered normal?

The reason for the ping test failure is "timed out.

link : Due to copyright issues, we will inform you on the topic.

The YouTube topic is "11. VXLAN BGP EVPN Configuration Example2".

Rest Regards,

[MHM Cisco World]

How you config VXLAN using basic cisco SW in GNS3 or this only you use GNS3 to draw topology ?

[goyourmin]

Hello. It's good to see you again.

I tested it in the Eve-ng environment and re-uploaded the topology and config.

[MHM Cisco World]

Sorry you not specify ingress replication nor multicast in config ?

[goyourmin]

In this way of configuration, it looks like there is no ingress replication or multicast.

This YouTuber showed me several ways to do this, among which I tried to construct a topology of BUM in a different way without multicast.

In my opinion, the ping test should be done without abnormalities in the Leaf equipment, is that correct?

[MHM Cisco World]

OK, the BUM is need, the leaf1 how it know where is host under which leaf it connect. 
please can you share the Youtube video here I want to see

[goyourmin]

https://youtu.be/HYgtQ5Bh-5g

thank you