Hello,
I need to install a 16 port switch module in a 2600 serie router.
I've seen that the lowest IOS version for this module is 12.2(2)XT and ordered a feature pack to have at least that version. The feature pack I got is 12.3(6c), I donwloaded it to the router, but I still can't use the NM-16ESW card.
from the show diag I have the following :
Slot 0:
C2611 2E Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 2.3
PCB Serial Number : JAD04350EV0 (645791340)
Part Number : 73-2840-13
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : C0
Deviation Number : 0-0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 92 41 02 03 C1 17 4A 41 44 30 34 33
0x10: 35 30 45 56 30 20 28 36 34 35 37 39 31 33 34 30
0x20: 29 82 49 0B 18 0D 04 00 81 00 00 00 00 42 43 30
0x30: 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
Serial 1T WAN daughter card
Hardware revision 1.0 Board revision J0
Serial number 22960639 Part number 800-01514-01
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 02 01 00 01 5E 59 FF 50 05 EA 01 00 00 00 00
0x30: 98 00 00 00 00 09 07 01 FF FF FF FF FF FF FF FF
Slot 1:
Unknown (type 681) Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-15156-01
Board Revision : E0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : FOC091603GN
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Unknown Field (type 00CF): 00 13 7F 23 57 35
MAC Address block size : 17
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 A9 41 01 00 C0 46 03 20 00 3B 34 01
0x10: 42 45 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 30
0x20: 39 31 36 30 33 47 4E 03 00 81 00 00 00 00 04 00
0x30: CF 06 00 13 7F 23 57 35 43 00 11 FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Anybody knows why I can't get that Network module running. I have installed it on some other ( brand new compared to this one ) 2600 serie routers and didn't have any problem.
