2950-24 switch cli commands

[mohawk53]

IOS12.0(5.3)WC(1)

I am a student at ITT and have trained on a CCNA simulator using a Cisco 1900 switch. I now have to work with a 2950-24 switch on a networking project. Needless to say I have found out that the cli commands are different. I need to know the commands to delete everything that has been previously configured and also how to see what has been configured. Any information on setting up VLANs would be greatly appreciated also Thank you.

[efrahim]

here is the configuration guide

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/index.htm

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/2950_wc/scg/index.htm

and some sample configuration, if possible upgrade the software to the latest, seems like first IOS released

http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Hardware:Cat2950

Hope this helps

[mohawk53]

Thank you for your prompt and helpful response. The information provided has helped me a great deal.

[kgillick]

the command to delete everything that has been previously configured is "write erase". To see what has been configure either "show run" or "show start". Search the cisco web site for setting up vlans.

[mohawk53]

Thank you for your help.The information provided is very much appreciated.