3750 doing routing or 2801

[waresd]

We have about 4 remote sites that I am going to be installing a new 3750 switch and 2801 router at each one. My question is, should I have the 3750 do the routing (2 vlan's, one for the main office subnet, and another for voip), or the 2801? What would you recommend?

Also, having EIGRP on the 2801, will the 2 vlan subnets on the 3750 show up in the routing table by default, or do I have to do other steps.

Thanks!

[thisisshanky]

I would recommend that the 3750 do the routing.

To have the 2801 see the routes behind the 3750, you will need to run EIGRP on the 3750. This will depend on if you have SMI or EMI image on the 3750.

[waresd]

Thanks, that's what I figured (as far as the routing goes). Right now, I have the SMI image on them.