3750 - show platform - stats for stack member and ring ?

[robetrem]

From the sh platform port-asic stats drop command, we are able to see the drop stats for the master switch.

Question 1: how can we see the same stats for the stack member ^

Question 2: Is that possible also to consult the drop stats for the 2 x ring. If yes - what the command ?

Thanks

[a-vazquez]

You manage the switch stack and the stack member interfaces through the stack master. You cannot manage stack members on an individual switch basis. You can connect to the stack master through the console port of one or more stack members. Be careful with using multiple CLI sessions to the stack master. Commands you enter in one session are not displayed in the other sessions. Therefore, it is possible to lose track of the session from which you entered commands.

This URLs should help you:

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_command_reference_chapter09186a0080395b55.html

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_command_reference_chapter09186a008017f8b8.html