11-01-2002 12:23 PM - edited 03-02-2019 02:34 AM
Can the 4506 supply power to both radio's A&B in the AP 1200? (11 watts)
DO the ports in the WS-4148-RJ45V supply more than 6.3 watts because the AP 1200 with both radios A&B require 11 watts?
If the 4506 cannot supply 11 watts, does this mean a Power Injector must be used with the AP 1200 for both radios?
11-01-2002 12:28 PM
Did you opt to choose a power transformer (AC) which comes usually along with the AP 1200, or you opted for a power injector. Power injector is needed for Power over Ethernet connections while using in conjuction with the AP1200, with 802.11 a and dual radio 802.11a/802.11b configurations.
For 802.11b only configurations, you can use the inline power switch module you have.
Remember if you have to get a power injector, you have to pay from your pocket extra. while the power transformer that comes with AP1200 is shipped free along with the unit.
11-04-2002 12:08 PM
Definitely requires a power transformer or injector for dual A/B operation - though with 802.11af support in future blades that should be a non-issue. But you'll have to wait until they are available.
Ken Johnson
LeTourneau University
--------------------------------
CIPTUG
Cisco IP Telephony Users Group
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide