I have 6506E Sup32 PFC3B 12.2(18)SXE device at the access layer of the network and would like to implement QoS (for access ports) for Voice, Video.
I suppose that untrusted microflow policing is best for me. But documents say that such kind functionality works for L3 MSFC routed traffic. For PFC3b I can use "mls qos bridged" for bridged traffic on specified vlans. Does it really work for input service policy on access ports for traffic from user ports (if I use this command on user's int VLAN)?
Distribution and core layers of my networks are MPLS based.
Config:
interface FastEthernet2/1
switchport
switchport access vlan 10
switchport mode access
switchport voice vlan 30
no ip address
spanning-tree portfast
service-policy input IPPHONE+VIDEO
interface Vlan30 ! also for Vlan 30
ip vrf forwarding VOICE
ip address 10.168.8.254 255.255.255.0
ip helper-address 10.168.2.33
ip helper-address 10.168.2.34
ip pim sparse-dense-mode
mls qos bridged
policy-map IPPHONE+VIDEO
class VOICE
police flow mask src-only 320000 8000 conform-action set-dscp-transmit ef exceed-action drop
class VIDEO-INTERACTIVE
police flow mask src-only 2400000 8000 conform-action set-dscp-transmit af41 exceed-action drop
class CALL-SIGNALING
police flow mask src-only 32000 8000 conform-action set-dscp-transmit cs3 exceed-action policed-dscp-transmit
class class-default
police flow mask src-only 5000000 8000 conform-action transmit exceed-action policed-dscp-transmit
