10-14-2003 05:32 AM - last edited on 03-25-2019 02:48 PM by ciscomoderator
Hi all,
what's the difference about following configuration?
and in configuration 2 , can it limit the total input bandwidth to 10M?
1. access-list 100 permit tcp any any eq http
interface f0
rate-limit input 10000000 1875000 1875000 conform-action continue exceed-action drop
rate-limit iput access-group 100 1000000 187500 187500 conform-action set-prec-transmit 4 exceed-action transmit
2. access-list 100 permit tcp any any eq http
interface f0
rate-limit iput access-group 100 1000000 187500 187500 conform-action set-prec-transmit 4 exceed-action transmit
rate-limit input 10000000 1875000 1875000 conform-action continue exceed-action drop
BRs
biao
10-20-2003 09:34 AM
The following URL explains the commands for configuring CAR and what total bandwidth it can limit.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/qcprt1/qcdcar.htm
10-23-2003 05:36 AM
Hi,
1.In the first configuration
If Total bandwidth goes above 10Mb and less than 11.8Mb, next rate-limit statement will be executed.If goes above 11.8Mb will get drop.
2.In the second configuration
All inbound HTTP traffic will not have a rate-limit.
All other traffic works same as the first configiuration.
3.If you want to limit the total B.W. to 10Mb
just enter as bellow.
interface f0
rate-limit input 10000000 1875000 1875000 conform-action transmit exceed-action drop
Regards
10-23-2003 08:11 AM
Hi Preddyi,
Maybe you are right, but i am not sure.
BRs
biao
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide