07-13-2001 05:01 AM - edited 03-01-2019 06:44 PM
Is there a way to route internet traffic automatically between firewalls around another link if a fails
07-13-2001 10:23 PM
can you please elaborate the setup...this statement of yours is not clear..
Regards,
Ramesh
07-17-2001 02:06 AM
Hi,
Link means, related to WAN or talking about internal link. If it's WAN link , yes it possible. U should provide information like
a. r u using BGP for Internet Traffic
b. or using Just static Entry
c. Is F/w are located at same LAN
Depanding on this, yes there is soln for all the three options.
Suresh HN
07-18-2001 12:19 PM
Yes, the previous message was correct. You can use ibgp or static routes with (alternating if you want load balancing too) different costs to the firewalls.
ip route .....fwa 5
ip route .....fwB 7
on the other
ip route ..... fwB 5
ip route ..... fwB 7
This is easier than bgp if you have not done that and also it works well if you offload the bgp stuff with static routes to your isp. Hope I am making sense.
djm
07-18-2001 12:19 PM
oops last one should be fw B then fw A
djm
07-27-2001 09:13 PM
Do you know any board here for IP Routing, Switching, and Remote Accessing?
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide