basic firewall connection error

[aysemsude]

Hi ,

I am a beginner and trying to build a simple network with a firewall. But ı cannot send icmp packets between to networks through the firewall.  Any help will be appreciated, thank you.

[Flavio Miranda]

Hi @aysemsude 

 As you are using the same security level on both interface, the firewall on this case is most like a router. What you can be missing is routes on the router and or in the firewall.

 If you run a tracert from PC0 towards PC1 where it stops?

[aysemsude]

Hi,

Thank you for your reply. I get this screen.

[Flavio Miranda]

Can you share the pkt file here? You need to zip the file first.

Alternativelly, you can share the router config and the firewall config. The whole config please

[aysemsude]

Here is the file thank you for the reply

[Martin L]

You can attach PT file here but it must be in a zip format;

Also check CLN community PT and CCNA forums at

https://learningnetwork.cisco.com/s/communities

https://learningnetwork.cisco.com/s/topic/0TO3i0000008jYHGAY/ccna-certification-community

https://learningnetwork.cisco.com/s/topic/0TO6e000000WEorGAG/packet-tracer

Regards, ML
**Please Rate All Helpful Responses **

[aysemsude]

Here is the file.Thank you for the reply